CNC bending machine (typical)

Application field: light-emitting word surrounding edge fully automatic operation

Bending machine no. : computer numerical control bending machine by the typical

Product summary: computer numerical control bending machine by the typical is a full-featured bending machine, automatic feeding, automatic cutting, automatic folding, automatic bending, automatic bending of circular functions, suitable for the LED luminous word aluminum skin surrounding edge production, the typical bending machine cut thickness to 2 mm, and offer double sided cut tooth option,

Device features:

Input DXF files, software, automatic feeding, slot, the slot number, grooving depth by computer automatic control,

1. Strictly abide by the machine operators safety operation procedures, wear labor protection articles according to the rules,

2. Before the start of must be carefully check whether the motor, switch, wiring and grounding is normal and strong each control station, inspection equipment, the button is in the correct position,

3. Check the contact ratio of upper and lower die and robustness; Check whether the positioning device is accord with the requirement of being processed,

4. On the skateboard and the positioning shaft are not in the state of the origin, run back to the origin program,

5. Equipment start empty after 1-2 minutes operation, skateboard full stroke movement 2-3 times, if found to have abnormal sound or failure shall be immediately stop, troubleshooting, all rear can normal work,

6. Work by 1 person should be a unified command, ensure that operators and feeding pressed closely, to ensure that personnel are in a safe location party must signal bending,

7. Sheet metal bending must be compaction, in case when bending sheet metal cock hurts,

Must cut off power supply when 8. The sheet metal die, stop running after,

9. When change under variable mold opening, not allowed to have any contact with the lower die,

10. Machine tools, machine tools are not allowed to stand at the back of the people at work,

11. It is strictly prohibited to separate sheet metal at one end of the compressive and flexural strength,

12. Mold or parts found during operation is not straight, parking should be correct, it is forbidden to operate by hand correction in case of hand injuries,

13. Ban fold the ultra thick iron or steel, high alloy steel, square steel quenching far and more than the performance of sheet metal bending machine sheet metal, so as not to damage the machine,

14. Check the contact ratio of the upper and lower mould; Pressure gauge indicating whether to conform to the regulations,

15. An exception occurs immediately stop and check the reason and ruled out in time,

16. To turn it off before and want to be in on both sides of the cylinder at the bottom of the lower die is placed on the block will slide down to block and

17. After exit control system application, first cut off power supply,